Balloon Drop Videos at STEWART’S Baskets & Balloons

The RELI-A-DROP sizes (100,200,500 and 1000) are all based on sizing your balloons to 8".
The RELI-A-DROP 100, 200, & 500 require a minimum 2 rig points while the 1000 - uses minimum 3.
 Please use  STRONG Rig line to ensure only the Balloons drop - and NO risk the your NET comes down
Fill the Net with Latex Balloons and/or Foil Balloons.  Once full then close the net.  Tie each side together with rig line or zip ties approx: 6 inches apart.
NOTE: before you hang the net, "Clear the line"- turn the balloon necks up and away from the release line to stop them from obstructing the line.
 Simple TEST before you raise the net to the ceiling--- slowly pull the release line as you watch the loop on the other end -- it will reduce in size -- now you know your net is working perfectly.
Now, secure the net close to the ceiling to reduce net movement when the release line is pulled!
SPECIAL NOTE of CAUTION!!! Please DO NOT secure the net to lights, air conditioning vents, fire sprinklers etc. Also, NEVER hang your net using MAGNETS!!!
If the net is hung away from the ceiling, it's best to add an additional RIG line from the back of the net (tie to the ceiling) which will create back pressure to STOP the net from swaying forward when the release line is pulled.
 Unwrap the release line from the cardboard holder as you raise the net. Once the net is in it's final destination then secure the release line in a safe place until it's time to do the Balloon Drop
IMPORTANT::: When you are going to do the RELEASE: You must pull the release line straight out from the net, do not pull under the net or at 90 degrees from the net, it must be pulled in the same direction as the net is hung.
The speed of the Balloon Drop is determined by the speed you pull the release line.
Thank You for your CHOICE to use RELI-A-DROP products!!    
Best Quote EVER....

Jonathan in Portugal said....

" Don't Panic.. It's RELI-A-DROP "

STEP by STEP :: RELI-A-DROP

RELI-A-DROP: Videos
